Oct 6, 2026Updated Oct 28, 20263 min read

How to read your tire size: 225/45R17

By DriveMarker

The short answer

225 is the section width in millimetres, 45 is the sidewall height as a percentage of that width, and R17 is the rim diameter in inches. Two short formulas take it from there.

Every tire prints its size on the sidewall, in the same three-part format: 225/45R17. Once you can read it, you can compare tires, check what the previous owner fitted, and use the tire size comparison tool with confidence.

The three groups of numbers

  • 225 — section width. The tire's width in millimetres, measured across its widest point.
  • 45 — aspect ratio. The sidewall height as a percentage of the width. Not a millimetre value — a ratio of the first number.
  • R17 — rim diameter. The wheel it fits, in inches. The "R" marks radial construction, the normal kind on passenger cars.

There are other markings too — load index, speed rating, DOT codes. They matter when you buy, but they are outside this guide.

The two formulas

Everything else about a tire's size follows from the first three numbers:

  • Sidewall height (mm) = width × aspect ÷ 100 → 225 × 45 ÷ 100 = 101.25 mm
  • Overall diameter (mm) = 2 × sidewall + rim × 25.4 → 2 × 101.25 + 17 × 25.4 = 634.3 mm

The 25.4 is the exact number of millimetres in an inch — it is the only unit conversion in the whole calculation.

Why the overall diameter matters

The speedometer counts wheel revolutions and multiplies by the diameter it was calibrated for (your factory size). Fit a tire with a larger diameter and each revolution carries the car farther than the speedometer assumes, so it reports a lower speed than you are really doing. A smaller diameter does the opposite.

That difference is exactly what the tire size comparison tool calculates — enter your current size and the size you are considering, and it shows the diameter difference and the resulting speedometer error before you buy anything.

The other numbers on the sidewall

The size is the part you need for a like-for-like replacement. The rest matters when you are choosing between tires:

  • Load index. A number such as 91 or 94, each mapping to a maximum load per tire (91 is 615 kg, 94 is 670 kg). Fit at least what the placard and manual require — never less.
  • Speed rating. A letter such as H (210 km/h), V (240 km/h) or W (270 km/h). It is a capability rating, not a target. Matching or exceeding the factory rating keeps the car's insurance and handling assumptions intact.
  • DOT date code. The last four digits of the DOT stamp give the week and year of manufacture — 3225 means week 32 of 2025. Tires age even when they are not driven, so check this on used or old stock.
  • M+S and the three-peak snowflake. M+S is a self-declared mud-and-snow marking; the three-peak mountain snowflake (3PMSF) means the tire passed a standard snow-traction test. They are not the same claim.

Those markings tell you whether a tire is suitable. The three size numbers tell you whether it fits.

What to check before you switch sizes

Fitment rules and legal requirements differ by country and by vehicle, so the tire's own load and speed ratings — plus your owner's manual and a reputable fitter — come before any guide, including this one. The math above tells you the geometry; the manual tells you what is allowed.

If you are buying a second set for winter, the winter tire cost and rules guide covers the 7°C rule, tread depth and what a set is likely to cost.

Common questions

What do the numbers on my tire wall mean?
Three groups, always in the same order: section width in millimetres, aspect ratio as a percentage of that width, and rim diameter in inches. A 225/45R17 tire is 225 mm wide, with a sidewall 45 percent of 225 mm tall, mounted on a 17-inch rim.
How do I calculate the total diameter of a tire?
Sidewall height in millimetres is width times aspect ratio divided by 100, and total diameter is two sidewalls plus the rim converted to millimetres (rim inches times 25.4). For 225/45R17 that is 101.25 mm per sidewall and 634.3 mm overall.
Does a bigger tire affect my speedometer?
A tire with a larger overall diameter covers more ground per revolution than the size the speedometer was calibrated for, so the speedometer reads lower than the speed you are actually doing. Smaller diameter does the reverse.

Use the tools from this guide

Track your own numbers

Averages describe somebody else’s car. Log your fill-ups, costs and service in a free garage and the guide above turns into your own data.

Essential cookies run DriveMarker. With your permission, privacy-friendly analytics and advertising cookies do too. Cookie policy.